top of page

6,000lm 1-Chip DLP™ 4K laser projectors deliver smooth, detailed images for an insightful visual experience.

Panasonic PT-FRQ60 6000-Lumen 4K UHD Laser DLP Projector

$10,499.00 Regular Price
$5,771.00Sale Price
Color
    • 1-Chip DLP™ laser projector, 6,000lm​ brightness
    • 4K (3840 x 2160) output resolution, ideal for museum exhibitions, education, and corporate offices
    • 2.0x zoom lens and wide V/H Lens Shift (V: +71 %, -48 %, H: +34 %, -27 %)
    • Preactivated upgrade kit for Geometry Manager Pro
    • Supports 240Hz/1080p high frame rate with minimal input-to-output latency
  • Projector type 1-Chip DLP™ projector
    DLP™ chip | Panel size 16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
    DLP™ chip | Display method DLP™ chip x 1, DLP™ projection system
    Light source Laser diodes
    Resolution 4K (3840 x 2160 pixels) (With Quad Pixel Drive)
    Screen Size (Diagonal) 1.02–7.62 m (40–300 in), 16:9 aspect ratio
    LENS 2.0x manual zoom (throw ratio: 1.46–2.93:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm
    Lens shift | Horizontal(From the origin point of the lens mounter) +34 %, -27 % (manual)
    Lens shift | Vertical(From the origin point of the lens mounter) +71 %, -48 % (manual)
    Keystone correction range Vertical: ±40 °, Horizontal: ±20 °
    Installation Ceiling/floor, front/rear, free 360-degree installation
    Terminals | SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
    Terminals | LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
    Power supply AC 100–240 V, 50/60 Hz; AC 110 V, 60 Hz (Taiwan)
    Power consumption 505 W
    Cabinet materials Molded plastic
    Operating environment Operating temperature: 0–45 °C (32–113 °F)*10, operating humidity: 10–80 % (no condensation)
    Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro*11
    Note *1 If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution. *2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *3 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. *4 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *5 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3of particulate matter). Estimated time until light output declines to 50 % varies depending on environment. *6 4K/60p signals are converted to the projector's resolution upon projection. *7 4K/60p signal input is converted to projector's resolution, supports YPBPR4:2:0 format only. *8 With legs fully retracted. *9 Average value. May dier depending on the actual unit. *10 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector. When optional AJ-WM50 Series Wireless Module is attached, operating temperature range becomes 0–40 °C (32–104 °F). *11 Some features only available after August 2022.
    Terminals | DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2],Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input*7)
    Terminals | Computer In D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
    Operation noise 36 dB (NORMAL/ECO) / 31 dB (QUIET)
    Terminals | MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
    Terminals | USB USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory, and for power supply (DC 5 V, maximum 2 A)
    Contrast ratio 20,000:1 (Full On/Full O) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. HDMI signal input)
bottom of page